Decoration pollution is invisible and intangible, yet it constantly affects the health of the entire family. From June to August this year, the State Administration for Market Regulation and the Ministry of Housing and Urban Rural Development jointly launched a special campaign to rectify indoor air formaldehyde and TVOC, targeting the chaos in the home decoration industry.
Home decoration sealing materials are an important part of indoor pollution sources. Choosing the right environmentally friendly adhesive can avoid formaldehyde hazards from the source and protect home respiratory safety.
01
Special Rectification | Protecting Indoor Air Safety
From June to August 2026, the State Administration for Market Regulation and the Ministry of Housing and Urban Rural Development will jointly carry out a special rectification of indoor air formaldehyde control and detection chaos, which will be promoted in three stages: sub bureau investigation, centralized rectification, and consolidation and improvement.
1, What are the key issues targeted in this special rectification campaign
✅ Chaos in the detection industry:
Cracking down on testing agencies falsifying data and issuing false testing results;
● Rectify the bundling of interests between detection and governance enterprises.
✅ Material quality issues:
Strictly investigate the flow of unqualified decoration materials into the home decoration market, with a focus on controlling products such as boards, adhesives, and sealants that are prone to releasing formaldehyde and TVOC.
✅ Inadequate acceptance control:
Strictly implement the requirements for indoor air pollutant testing after the completion of newly-built houses, and prohibit delivery for use if the standards are not met. Standardize the indoor environment testing process for home decoration and fixtures.
2, The special rectification has achieved phased results:
● Punish a group of institutions that engage in false testing and illegal governance;
● Forcing home decoration source control and guiding the public to focus on material and environmental protection issues;
Establish a traceability system for testing reports to safeguard consumer rights.
02
Original intention of rectification | Originating from the public's health demands
Formaldehyde is classified as a carcinogen by the World Health Organization, with a release cycle of 3-15 years. The release rate will significantly accelerate in high temperature and high humidity environments.
In home decoration, inferior materials will continue to release volatile harmful substances such as formaldehyde and TVOC.
❌ Long term exposure to excessive indoor air can easily irritate the respiratory tract, causing allergies, dizziness, and discomfort;
❌ Children are 3-5 times more sensitive to formaldehyde than adults, which can increase health risks such as asthma and weakened immunity.
Many families think that "ventilation for a few months is safe", but hidden building materials such as sealants and accessories are easily overlooked as hidden sources of pollution.
The national special rectification is aimed at promoting pollution control from the source, not only relying on post treatment, but also ensuring the quality of decoration materials entering the site, achieving the principle of "prevention is greater than treatment".
03
C-768 | Zero formaldehyde, preferred for kitchen and bathroom sealing
The kitchen and bathroom are the areas with the heaviest water vapor in the home. The gaps between the sink, stove, shower room, and bathroom cabinet should not only be waterproof and mold resistant, but also maintain the bottom line of environmental protection.
Genesis C-768 kitchen and bathroom anti mold adhesive is specially designed for home decoration environments, prioritizing environmental protection and safety. Core product features:
Patented anti mold formula, obtained authoritative level 0 anti mold certification. The damp environment in the kitchen and bathroom can effectively inhibit the growth of mold.
✅ Waterproof, stain resistant, and easy to clean:
After curing, a dense waterproof adhesive film is formed to prevent water leakage and seepage;
The colloidal surface is smooth, free of dirt and grime, and easy to maintain and worry free.
✅ Temperature resistance, strong adhesion, and crack resistance:
Adapting to the temperature difference between the north and south, it can be used stably, firmly adhered to various substrates, and not easily shrunk, cracked, or peeled off.
>Applicable scenarios: kitchen sink edge sealing, stove gap, cabinet countertop; The bathroom shower room, bathroom cabinet, and toilet are sealed around the perimeter, suitable for home decoration and workwear.
04
Usage | Easy to operate and learn
1. Pre treatment: Clean the surface of the gaps, remove old glue, oil stains, dust, and water stains, and ensure that the construction base is dry and clean.
2. Cutting nozzle: Cut the nozzle diagonally and adjust the opening size according to the gap size.
3. Glue application: Install the glue gun and evenly apply glue along the gap to ensure that the glue fills the gap.
4. Trimming and smoothing: After the glue is applied, use a scraper or fingers (wearing gloves) to smooth the glue surface to ensure a beautiful appearance.
5. Curing and maintenance: Maintain ventilation after construction, and allow the colloid to solidify for about 24 hours;
Avoid excessive water and contact before curing.
>Tip: It is recommended to maintain a construction environment temperature of 5-30 ℃. Wet environments should be avoided during rainy days for better curing effects.
05
Summary | Home decoration health is the absolute principle
National special rectification of indoor formaldehyde TVOC, Send a clear signal: indoor air quality should focus on prevention at the source rather than remedial measures afterwards.
Many families only focus on the environmental protection of boards, but ignore hidden building materials such as sealants and accessories. The sealant for kitchen and bathroom gaps comes into contact with water vapor every day. Poor quality sealant is not only prone to mold and blackening, but also continuously releases formaldehyde TVOC.
Genesis C-768 kitchen and bathroom anti mold adhesive, with zero formaldehyde environmental protection properties and 0-level anti mold and waterproof performance, reduces indoor pollution from the source of decoration, and balances anti mold durability and home health.
Choosing the right sealing materials for home decoration can block hidden dangers at the beginning of the decoration, allowing every family to breathe safe air.
Your message must be between 20-3,000 characters!
